Seachem Cupramine 100mL Copper Treatment for External Fish Parasites Ich Velvet

Description

Seachem Cupramine 100mL
Copper treatment for external parasites. Active at low concentration (does not precipitate). Bound on amine so it is not as toxic to fish. 100% Removable with carbon or Cuprisorb.
Overview:
Cupramine effectively eradicates Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other ectoparasites of both freshwater and marine fish. It is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), active at low concentrations, and is removable with carbon.
There is more than a four-fold concentration gap between the minimal therapeutic dose (0.2 mg/L) and the toxic dose (0.8 mg/L). Cupramine is easily removable with chemical filtration. It is highly effective and safe in freshwater as well as marine water.
Indications:
Cupramine is appropriate for treating a variety of ectoparasites of both freshwater and marine fish including; Ich, White Spot and Velvet. Be aware that many diseases and infections share similar physical and behavioral symptoms, e.g. clamped fins, lesions, loss of appetite.
Directions:
Before Treating:
Remove all invertebrates - these are extremely sensitive to copper and will not tolerate treatment with a copper-based medication. Turn off UV filters, ozone filters, and remove chemical filtration like MatrixCarbon and Purigen. Do not use in conjunction with any other medication. Do not use any products which contain reducing agents (conditioners, ammonia binders, etc.) while using Cupramine.
Treatment:
If the bottle has a dropper cap, use 20 drops (1 mL) per 40 L (10.5 US gallons) the first day, wait 48 hours, then repeat. On non-dropper caps, each inner ring is 1 mL. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater). Leave at this concentration for 14 days. Do not redose without testing (MultiTest Copper). If tank has ever been treated with an ionic copper (e.g. copper chloride, sulfate or citrate), test copper level after initial dosing. Although most fish tolerate Cupramine to 0.8 mg/L, it is not advisable to exceed 0.6 mg/L copper.
Finish the Full Treatment:
Ich, velvet, and many other parasites spend a large portion of their life cycle as a cyst that is immune to medication and hiding in the substrate of your tank. Remember that you need to finish the full treatment even if you can’t see parasites on the fish!
After Treating:
Cupramine can be removed using carbon or CupriSorb. Leave the copper-absorbing media in your tank for at least a week after the copper concentration has reached 0 to ensure all traces of the medication have been completely removed.
In case of eye exposure, promptly & thoroughly wash eyes with water & seek medical attention. Aquarium Use Only. Keep Away from Children. For ornamental fish only. Not for human consumption. Not to be used in conjunction with animals used for human consumption.
Size:
100 mL