-40%
3 PACK 20" x 20" Stainless Steel Hood Grease Commercial Exhaust Filter Baffle
$ 62.73
- Description
- Size Guide
Description
3 PACK 20" x 20" Stainless Steel Hood Grease Commercial Restaurant Filter BaffleKeep your exhaust hoods clean with this Regency 20" x 20" x 2" stainless steel hood filter.
How do I know what is the "height" and "width" of my hood filter?
The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:
Why are my hood filter's measurements a little different than what you have listed?
We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.
Why do the baffles run up and down and not side to side?
These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.
Designed with durability in mind, this hood filter is a long-lasting addition to your establishment. Hood filters trap grease, allowing it to flow down into your hood grease trap to prevent unsafe work conditions. An essential addition to any kitchen with a hood, this filter will keep your kitchen running safely and efficiently!
Dishwasher Safe
This item can safely be cleaned in a commercial dishwasher.
Vertical Baffles
Solids and grease are deposited directly onto smooth, vertical baffles and drained out, assisting in reducing the potential for grease fires.
Stainless Steel Construction
Made of welded type 430 stainless steel construction, this hood filter withstands the demands of your busy, commercial kitchen.
Drop Handles
Rugged drop handles ensure both durability and easy installation. When it's time to clean your filter, the handles provide easy removal.
Versatile Cleaning Options
This hood filter cleans easily with soap and water. You can also use a pressure washer to ensure that you keep your filter working properly. It's even dishwasher safe for added convenience!
How do I know what is the "height" and "width" of my hood filter?
The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:
Why are my hood filter's measurements a little different than what you have listed?
We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.
Why do the baffles run up and down and not side to side?
These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.
Width
20 Inches
Height
20 Inches
Dishwasher Safe
Yes
Filter Type
Standard
Material
Stainless Steel
Thickness
2 Inches
Type
Hood Filters